HIGH TEMP GREY SILICONE 70 hour @ 500 pphm +260°C (+500°F) +225°C (+437°F) – 74°C (-101°F) 50% *Complete specification data and testing methods are available upon request. Advanced Ozone Resistance tested to... High Temperature Resistance Low Temperature Resistance tested to... Compression Set Maximum... Tested to Intermittent Continuous EPDM 70 hour @ 500 pphm +135°C (+275°F) +100°C (+212°F) – 55°C (-67°F) 25% All Around Design Excellence This universal flashing has been designed to fit virtually all panel configurations. Sleeve flexibility absorbs vibration and pipe movement caused by expansion/contraction. Easy on-site customization can accommodate all normal installations. On-Site Customization Pipe diameters can be seen clearly for proper fitting. Ozone and UV Protection Flashings are made of EPDM or High Temp Silicone and are designed for maximum resistance to all weather conditions. Adaptable Base The base is designed to mold to most panel configurations and roof pitches regardless of pipe location. Ozone and UV Protection Flashings are made of EPDM or High Temp Silicone and are designed for maximum resistance to all weather conditions. Adaptable Base The base is designed to mold to most panel configurations and roof pitches regardless of pipe location. Master Flash® was used to create a new engineering standard for profiled roofing by the International Association of Plumbing and Mechanical Officials (for the Uniform Plumbing Code) and remains the only product listed. These products are also listed for use with Type B vents. The addition of fire retarding agents milled directly into the rubber compound created a self extinguishing feature which enables it to be used with type “B” vents. Listed with IAPMO certification No. 3121 Specifically Designed For Solar & Electrical Applications Universal Mini Master Flash® Brown Black Dark Gray Dark Green Light Green Light Blue Dark Blue Bright Red Terra Cotta Copper Gray White UNIVERSAL Master Flash® www.aztecwasher.com
RkJQdWJsaXNoZXIy MjM3ODk4