9/2023 Aztec Washer Company: 13821 Danielson St., Poway, CA 92064 1-800 WASHER 5 (927-4375) Ph: 858 513-4350 • Fax: 858 513-4305 • [email protected] • www.aztecwasher.com SCAN THE QR CODE TO GET THE DIGITAL VERSION RECONSTRUCTION • NEW CONSTRUCTION • COMMERCIAL • RESIDENTIAL • INDUSTRIAL Master Flash® Retrofit Applications
Weather Resistance Designed to withstand the damaging effects of ultra violet light and ozone. Base Flexibility Designed to conform to most panel configurations and roof pitches regardless of pipe location. Modification Made Simple Easy to see pipe diameters make for painless on-site customization. Easily Installed Fastener Snaps Included Standard Retrofit Master Flash® Two Compounds: EPDM or High Temp Silicone / 3 Sizes 1 2 3 4 5 Wraparound Seal Measure & Trim Add zip tie to Complete Fasten 7/8”- 4” (22 - 101mm) 4”- 9” (101 - 228mm) RF101BP RF101GP RF102RS RF102GX RF201BP RF201GP RF202RS RF202GX RF301BP RF302RS RF301GP 8” (203mm) 14” (355mm) 9-1/2” - 17” (241 - 431mm) 21-1/2” (546mm) #1 #2 #3 Black EPDM Gray EPDM Red Silicone Gray Silicone Black EPDM Gray EPDM Red Silicone Gray Silicone Black EPDM Gray EPDM Red Silicone Gray Silicone RF302GX Name Part # Compound Pipe Range Base C B A B–Cut to suit pipe size A-Top Opening C-Base #3 Standard Retrofit Flashing Details 9-1/2” - 17” ( 241 - 431mm) 21-1/2” (546mm) 9-1/2” (241mm) C B A B–Cut to suit pipe size A-Top Opening C-Base #2 Standard Retrofit Flashing Details 4” - 9” (101 - 228mm) 14” (355mm) 4” (101mm) C B A B–Cut to suit pipe size A-Top Opening C-Base #1 Standard Retrofit Flashing Details 7/8” - 4” (22 -101mm) 8” (203mm) 7/8” (22mm)
included no hassle stainless steel gripper to secure retrofit application Electrical Mast Connection Master Flash® Specifically designed for the Residential Roofing Industry. The built in 20º pitch allows adaptability to almost any roof pitch including 45º Applications: Drywall • Sidewall • Applications Stucco Walls • Corrugated Metal Sides • Roof Penetrations Specifically designed for Sidewall or Low Profile Applications Stainless Steel Gripper for Retrofit Applications Included LOW-PROFILE MULTI-FLASH Master Flash® Stainless Steel Gripper for Retrofit Applications Included B-Overall Height 10-3/4” (273mm) 5/16” (8mm) A-Pipe Range Closed - 8” (0-203mm) C-Base B-Overall Height 16-1/2” (419mm) 5/16” (8mm) A-Pipe Range Closed-12-1/2” (0-318mm) C-Base B-Overall Height 6-1/4” (158mm) 5/16” (8mm) A-Pipe Range Closed-3-3/4” (0-95mm) C-Base Low-Profile Flashing Details #1 #2 #3 LP101BA-G LP201BA-G LP301BA-G Name #1 Low-Profile #2 Low-Profile #3 Low-Profile Part # Compound Black EPDM Black EPDM Black EPDM EMC101BS EMC102RS EMC102GX Closed - 5-3/8” (0 - 136mm) 15” (381mm) Electrical Mast Connection Black EPDM Gray Silicone Red Silicone Name Part # Compound Pipe Range Base 15” (381mm) A-Top Opening Closed C-Base Electrical Mast Connection Flashing Details B-Pull to suit pipe size 0-5-3/8” (0-136mm) Extreme Angle Multi-Flash Master Flash® For standard or retrofit applications with a 3/12 to 16/12 pitch, while accepting & responding to the most commonly encountered pipe penetrations. This flashings were designed to seal existing pipes/vents that requires a wrap-around existing or hard to reach installation Retrofit Applications Just cut down the middle for retrofit applications. Specifically designed for either Standard or Retrofit Applications EMF101BA-G EMF102GX-G Retrofit 5/8”- 4-1/4” (16 - 108mm) Standard 11/16” – 4-3/4” (30 - 120mm) 11” 279mm) #1 Extreme Angle Multi-Flash Black EPDM Gray SILICONE Name Part # Compound Pipe Range Base
Base Flexibility The base is designed to mold to most panel configurations and roof pitches regardless of pipe location. Easy install stainless steel gripper to secure a retro custom fit. (GRIPPER INCLUDED) No hassle stainless steel gripper to secure retrofit applications Accommodates FOUR 1/64”- 3/8” (1-9mm) lines and One pipe Closed Top - 2-3/4” - (0 - 70mm) Multi-Port Master Flash® “Two flashings in one” to handle virtually all job applications. Multi-Flash Master Flash® A C B B-Overall Height A-Top Opening Multi-Port Flashing Details Closed 2-1/4” (57mm) 4-1/2” (114mm) C-Base Standard Closed- 2-3/4” (0 - 70mm) Retrofit 1-1/4”- 2-1/4” (31 - 57mm) MP101BA-G 4-1/2” (114mm) Name Multi Port Part # Compound Pipe Range Base 1/64”-3/8” (1-9 mm) Port Black EPDM MP102GX-G Gray Silicone
SIZING CHART Check diameter of pipe. Select the appropriate Multi-Flash Master Flash® for pipe or duct diameter. Only use maximum pipe diameters on minimal roof angles. For extreme pitch or surface irregularity select next larger size. Then refer to the part number for the Multi-Flash Master Flash® desired. Two Compounds: EPDM / High Temp Gray Silicone HIGH TEMP RED OR GRAY SILICONE 70 hour @ 500 pphm +260°C (+500°F) +225°C (+437°F) – 74°C (-101°F) 50% *Complete specification data and testing methods are available upon request. Advanced Ozone Resistance tested to... High Temperature Resistance Low Temperature Resistance tested to... Compression Set Maximum... Tested to Intermittent Continuous EPDM 70 hour @ 500 pphm +135°C (+275°F) +100°C (+212°F) – 55°C (-67°F) 25% Standard 5/8”- 4” (15 - 101mm) Retrofit 1-1/8”- 3-7/8” (28 - 98mm) Retrofit 2”- 5” (50 - 127mm) Retrofit 3”- 6-1/2” (76 - 165mm) Retrofit 3-3/4”- 7” (95 - 177mm) Retrofit 4-1/2”- 8-1/2” (114 - 215mm) Retrofit 5-1/4”- 10” (133 - 254mm) Retrofit 6-1/2”- 12-3/4” (165 - 323mm) Retrofit 9-1/4”- 20-1/2” (234 - 520mm) Retrofit 11”- 28” (279 - 711mm) Standard Closed – 5-3/4” (0-146mm) Standard 2-3/4” - 7” (69 - 177mm) Standard 4” - 8-1/4” (101 - 203mm) MF201BA-G MF301BA-G MF401BA-G MF502GX-G 6” (152mm) 8” (203mm) 10” (254mm) 12” (304mm) MF601BA-G MF702GX-G MF802GX-G Standard 9-1/2” – 20-1/2” (241 - 520mm) 25” (635mm) Standard 12” - 28-1/2” (304 - 723mm) 34” (863mm) MF901BA-G MF951BA-G #3 #2 #4 #6 #9 Maxi Black EPDM MF202GX-G Gray Silicone Black EPDM Gray Silicone Black EPDM Gray Silicone Black EPDM Gray Silicone Black EPDM Gray Silicone Black EPDM Gray Silicone Black EPDM Gray Silicone Black EPDM Gray Silicone Black EPDM Gray Silicone MF402GX-G MF302GX-G MF501BA-G 11” (279mm) #5 Standard 4-3/4” - 10” (121 - 254mm) MF602GX-G Standard 6” - 11” (152 - 279mm) 14” (355mm) MF701BA-G #7 17” (431mm) Standard 6-3/4” - 12” (171 - 304mm) MF801BA-G #8 MF902GX-G MF952GX-G Name Part # Compound Pipe Range Base A B C B-Overall Height A-Top Opening C-Base #2 Multi-Flash Flashing Details 5/8” (15mm) 2-3/4” (70mm) 6” (152mm) B-Overall Height 4-3/4” (120mm) 2-3/4” (69mm) 10” (254mm) A-Top Opening C-Base #4 Multi-Flash Flashing Details A B C B-Overall Height 4-1/2” (114mm) 4” (101mm) 11” (279mm) A-Top Opening C-Base #5 Multi-Flash Flashing Details A B C A B C B-Overall Height Closed 8” (203mm) A-Top Opening C-Base #3 Multi-Flash Flashing Details 3” (76mm) A B C B-Overall Height 12” (304mm) A-Top Opening C-Base #6 Multi-Flash Flashing Details 4-3/4” (120mm) 4-1/2” (114mm) B-Overall Height 9-1/2” (241mm) 5-3/4” (146mm) A-Top Opening C-Base #9 Multi-Flash Flashing Details 25” (635mm) A B C B-Overall Height 12” (304mm) 7-1/2” (190mm) A-Top Opening C-Base Maxi Multi-Flash Flashing Details 34” (863mm) A B C A B C B-Overall Height A-Top Opening C-Base #7 Multi-Flash Flashing Details 6” (152mm) 14” (355mm) 5-1/2” (140mm) A B C B-Overall Height 5-3/4” (146mm) A-Top Opening C-Base #8 Multi-Flash Flashing Details 17” (431mm) 6-3/4” (171mm)
Weather Protection Made of E.P.D.M. these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light. Design Excellence Specially designed for square vent applications, sleeve flexibility accommodates vibration and pipe movement caused by expansion/contraction. Easy on-site customization accommodates all normal installations. Roof Adaptability The base is designed to mold to most panel configurations and roof pitches regardless of pipe location. Square Vent Master Flash® Specifically designed for square pipes No hassle stainless steel gripper and plastic zip tie to secure retrofit applications Multi-Flash Square Vent Master Flash® Two Applications • One Design • Multiple Functions MFSQ101BA MFSQ102RA MFSQ201BA MFSQ202RA MFSQ301BA MFSQ302RA 8” (203mm) 14-1/4” (361mm) 24-3/4” (628mm) #1 #2 #3 Black EPDM Red Silicone Black EPDM Red Silicone Black EPDM Red Silicone Standard Closed- 5” (0 - 125mm) Standard Closed- 19-1/8” (0 - 487mm) Standard Closed- 10” (0 - 254mm) Retrofit 7/8” - 4-1/2” (22 - 115mm) Retrofit 7/8” - 19-1/4” (22 - 444 Retrofit 7/8”- 10” (22 - 254mm) Name Part # Compound Pipe Range Base *NOTE retrofit is the same as the standard pipe range A C B B-Cut to suit pipe size A-Top Opening #1 Square Vent Flashing Details 2-1/2” (63mm) 2-1/2” to 4” (63-101mm) 8” (203mm) C-Base A C B B-Cut to suit pipe size A-Top Opening #2 Square Vent Flashing Details 2-1/4” (57mm) 2-1/4” to 5-1/2” (57-139mm) 16-3/4” (425mm) C-Base #1 #2 2-1/2”- 4” (63 - 101mm) 2-1/4” to 5-1/2” (57-139mm) RF101BP-SQ RF201BP-SQ 8” (203mm) 16-3/4” (425mm) Black EPDM Black EPDM Name Part # Compound Pipe Range Base
Specifically designed for Metal Roofing Industry Roof Vent Sealing Adapter Master Flash® Stainless Steel Gripper & Aluminum Termination Strips for Retrofit Applications Included Weather Protection Made of EPDM or High Temp Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light. Universal Retrofit Master Flash® Available in: EPDM / Black, Light & Dark Gray US Patent # 10,161,135,B2 7/8”- 2-1/2” (22-63mm) RF101BS-RD RF101GS-RD RF101NG-RD RF102RS-RD RF102GX-RD RF201GS-RD RF201NG-RD RF202RS-RD RF202GX-RD RF301GS-RD RF301NG-RD RF302RS-RD RF302GX-RD RF301BS-RD 6-1/4” (158mm) 3-1/4” - 10” (95 - 254mm) 14-1/2” (368mm) #1 #2 #3 Black EPDM Gray EPDM Dark Gray EPDM Red Silicone Gray Silicone Black EPDM Gray EPDM Dark Gray EPDM Red Silicone Gray Silicone Black EPDM Gray EPDM Dark Gray EPDM Red Silicone Gray Silicone 2” - 6-1/2” (50 - 165mm) RF201BS-RD 10-3/4” (273mm) Name Part # Compound Pipe Range Base A C B B-Cut to suit pipe size A-Top Opening C-Base #2 Universal Retrofit Flashing Details 2”-6-1/2” (50-165mm) 10-3/4” (273mm) 2” (50mm) A C B B-Cut to suit pipe size A-Top Opening C-Base #3 Universal Retrofit Flashing Details 3-1/4”-10” (95-254mm) 14-1/2” (368mm) 3-1/4” (95mm) A C B A-Top Opening C-Base #1 Universal Retrofit Flashing Details 7/8”- 2-1/2” (22-63mm) 6 - 1/4” (158mm) 7/8”(22mm) B-Cut to suit pipe size 24” (609mm) Name Part # Compound 1/4” (6mm) Base Height Black EPDM Dark Gray EPDM Gray EPDM Square or Rectangle Closed -12” (101- 305mm) RVA101BA-MF RVA101GA-MF RVA101NG-MF Metal Roof Vent Sealing Adapter Multi-Flash Closed Top
Master Seal® Bonded Washers P36 Saddle Washers Rubber Washers Other Quality Aztec Products INTERNATIONAL HEADQUARTERS 13821 Danielson Street, Poway, CA 92064 1-800-WASHER 5 (927-4375) | Ph: 1-858-513-4350 Fax: 1-858-513-4305 | E-mail: [email protected] www.aztecwasher.com Master Flash® , Universal Master Flash® , Multi-Flash® Master Flash® and Master Seal® are trademarks of Aztec Washer Company, Inc. For Technical Support Call: 1-800-WASHER 5 (927-4375) (Outside California Only), California Callers: (858) 513-4350 YEAR WARRANTY 35 To see our complete product line go to: www.aztecwasher.com Installation Videos: www.aztecwasher.com/installationvideos/ VIDEO INSTALLATION AZTEC (UK) LTD. Unit 55, Enterprise Trading Estate Hurst Lane, Pedmore Brierley Hill, West Midlands DY5 1TX, United Kingdom Tel: +44 1384 573444 | Fax: +44 1384 572029 | E-mail: [email protected] www.aztecmaster-flash.co.uk AZTEC MEXICO Serv.y Maqs.Intls.SAdeCV. Ph:+52 665 6542571 | Fax: +52 665 6550796 | E-mail: [email protected] www.aztecwasher.mx AZTEC INTERNATIONAL S.A., ul. Sowia 13C, 62-080 Tarnowo Podgórne, Poland Tel: +48 61 867 60 84 | Fax: +48 61 867 34 44 | E-mail: [email protected] www.aztec-international.eu • www.master-flash.eu AZTEC AUSTRALASIA 70 Logis Boulevard, Dandenong South VIC 3175 T: (03) 9768 2394 | F: (03) 9768 2580 M: 0458544111 | E: [email protected] www.aztecau.com.au Aztec Nordic Ltd Gropintie 6 10600 EKENAS FINLAND | Tel: +358 40 849 7781 http://www.aztecnordic.fi/
RkJQdWJsaXNoZXIy MjM3ODk4