The built in 20° pitch allows adaptability to almost any roof pitch including 45° Specifically designed for the Residential Roofing Industry, EMC102RS EMC102GX EMC101BS A-Top opening diameter - Closed B-Cut to suit pipe size - Closed - 5-3/8” C-Base dimensions - 15” Black EPDM Red Silicone Gray Silicone Electrical Mast Connection (EMC) Pipe Range: 0” - 5-3/8” COMPOUND PART NO. FLASHING DETAILS HIGH TEMP GREY OR RED SILICONE 70 hour @ 500 pphm +260°C (+500°F) +225°C (+437°F) – 74°C (-101°F) 50% *Complete specification data and testing methods are available upon request. Advanced Ozone Resistance tested to... High Temperature Resistance Low Temperature Resistance tested to... Compression Set Maximum... Tested to Intermittent Continuous EPDM 70 hour @ 500 pphm +135°C (+275°F) +100°C (+212°F) – 55°C (-67°F) 25% Adaptable Base The base is designed to mold to most panel con gurations and roof pitches regardless of vent location. Electrical Mast Connection Master Flash® No hassle stainless steel gripper to secure retro t application included Weather Protection Made of EPDM or High Temp Red or Gray Silicone, These ashings are compounded speci cally for maximum resistance to weathering due too zone and ultraviolet light. Designed to seal existing pipes/vents that requires a wrap-around installation Aztec Washer Company • 1-800-WASHER 5 (927-4375 • Ph: 858-513-4350 • Fax: 858-513-4305 • [email protected] • www.aztecwasher.com • Aztec Washer Co.9/2023 Pipe diameters can be seen clearly for proper tting.
RkJQdWJsaXNoZXIy MjM3ODk4