Universal Master Flash Roof Vent Pipe Flashings | Aztec Washer Company, Inc. 1-800-WASHER 5 (927-4375)

Universal Master Flash®

This universal flashing has been designed with sleeve flexibility to absorb vibration and pipe movement caused by expansion/contraction while sealing out unwanted elements. Easy on-site customization can accommodate virtually all installations.

Click to View

AVAILABLE COLORS

Installation EPDM

Installation Silicone

Rubber Specifications

Check diameter of your pipe or duct and select appropriate Universal Master Flash® to accommodate your application as indicated on the chart below. For extreme pitch or surface irregularity, select next larger size.

ALL AROUND PERFORMANCE

OZONE AND UV PROTECTION

Flashings are made of EPDM and Silicone, and are designed for maximum resistance to all weather conditions.

ON-SITE CUSTOMIZATION

Pipe diameters can be seen clearly for proper fitting.

ADAPTABLE BASE

The base is designed to mold to most panel configurationsand roof pitches regardless of pipe location.

ALL AROUND DESIGN EXCELLENCE

This universal flashing has been designed to fit virtually all panel configurations. Sleeve flexibility absorbs vibration and pipe movement caused by expansion/contraction. Easy on-site customization can accommodate all normal installations.

TWO COMPOUNDS / 9 SIZES 10 COLORS
Available in two compounds to handle virtually all job applications
		EPDM	SILICONE
ADVANCED OZONE RESISTANCE tested to...		70 hour @ 500 pphm	70 hour @ 500 pphm
HIGH TEMPERATURE RESISTANCE
tested to	intermittent	• +135ºC (+275ºF)	• +260ºC (+55ºF)
	continuous	• +100ºC (+212ºF)	• +225ºC (+437ºF)
LOW TEMPERATURE RESISTANCE tested to…		• +50ºC (-65ºF)	• -74ºC (-100ºF)
TENSILE SET maximum…		10MPa (1450psi)	5 Mpa (700 psi)
COMPRESSION SET maximum…		25%	50%
Complete specification data and testing methods are availiable upon request

SIZING CHART
Check diameter of your pipe or duct and select appropriate Universal Master Flash® to accommodate your application as indicated on the chart below. For extreme pitch or surface irregularity, select next larger size.
	Designate Pipe Size	Compound	Part No.	Flashing Details
#1	1/4" - 2-1/2"	Black EPDM	RD101BE	A - Top Opening diameter closed
	(6.4mm - 63.58mm)	Grey EPDM	RD101GG	B - Overall Height 2.77" (70.4mm)
		Red Silicone	RD101RG	C - Base Diameter 4.75" (120.7mm)

#2	1-3/4" - 3"	Black EPDM	RD201BE	A - Top Opening diameter 1.44" (36.6mm)
	(44.5mm - 76.2mm)	Grey EPDM	RD201GG	B - Overall Height 3.53" (89.7mm)
		Red Silicone	RD202RG	C - Base Diameter 6.21" (157.7mm)

#3	1/4" -5"	Black EPDM	RD301BE	A - Top Opening Diameter Closed
	(6.4mm - 127mm)	Grey EPDM	RD301GG	B - Overall Height 3.64" (92.5mm)
		Red Silicone	RD302RG	C - Base Diameter 7.74" (196.6mm)

#4	3" - 6-1/4"	Black EPDM	RD401BE	A - Top Opening diameter 2.38" (60.5mm)
	(76.2mm - 158.8mm)	Grey EPDM	RD401GG	B - Overall Height 5.05" (128.3mm)
		Red Silicone	RD402RG	C - Base Diameter 9.26" (235.2mm)

#5	4-1/4" - 7-3/4"	Black EPDM	RD501BE	A - Top Opening diameter 3.50" (88.9mm)
	(108mm - 196.9mm)	Grey EPDM	RD501GG	B - Overall Height 4.43" (112.5mm)
		Red Silicone	RD502RG	C - Base Diameter 10.75" (273.0mm)

#6	5" - 9"	Black EPDM	RD601BE	A - Top Opening diameter 4.25" (108mm)
	(127mm - 228.6mm)	Grey EPDM	RD601GG	B - Overall Height 5.60" (142.2mm)
		Red Silicone	RD602RG	C - Base Diameter 12.50" (317.5mm)

#7	6" - 11"	Black EPDM	RD701BE	A - Top Opening diameter 4.90" (124.5mm)
	(152.4mm - 279.4mm)	Grey EPDM	RD701GG	B - Overall Height 5.84" (148.3mm)
		Red Silicone	RD702RG	C - Base Diameter 14.60" (370.8mm)

#8	7" - 13"	Black EPDM	RD801BE	A - Top Opening diameter 5.80" (147.3mm)
	(177.8mm - 330.2mm)	Grey EPDM	RD801GG	B - Overall Height 7.53" (191.3mm)
		Red Silicone	RD802RG	C - Base Diameter 16.5" (419.1mm)

#9	9" -19"	Black EPDM	RD901BE	A - Top Opening diameter 7.45" (189.2mm)
	(228.6mm - 482.6mm)	Grey EPDM	RD901GG	B - Overall Height 8.09" (205.5mm)
		Red Silicone	RD902RG	C - Base Diameter 25.25" (641.1mm)

Flashing Detail