HOME | ABOUT US | CERTIFICATIONS | CATALOG | CONTACT US | REQUEST QUOTE
 
 
  Translate This Page 
 
Featured
 
 
 
 

Electrical Mast Connection Master Flash®

Aztec Washer's new Electrical Mast Connection Master Flash is specifically designed for the residential roofing industry.


MASTER FLASH® FEATURES

WEATHER PROTECTION

Made of EPDM or Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.

EASY ON-SITE CUSTOMIZATION

Fast, one piece construction allows for easy on-site installation in usually 5 minutes.

BASE FLEXIBILITY

The soft aluminum base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location.

DESIGN EXCELLENCE

Aztec's flexible design meets virtually all roofing needs. Sleeve flexibility accommodates vibration and pipe movement caused by expansion/contraction. the soft aluminum base easily conforms to roof panels. Master Flash® was used to create a new engineering standard for profiled roofing by the International Association of Plumbing and mechanical Officials(for the uniform Plumbing Code) and remains the only product listed. These products are also listed for use with Type B vents. The addition of fire retarding agents milled directly into the rubber compound created a self extinguishing feature which enables it to be used with Type B vents. Listed with IAPMO certification No. 3121.

ADVANCED OZONE RESISTANCE tested to...

EPDM

70 hours @ 500 pphm

SILICONE

70 hours @ 500 pphm
HIGH TEMPERATURE RESISTANCE
Tested to Intermittent
  Continuous
 
+135ºC (+275ºF)
+100ºC (+212ºF)
 
+260ºC (+500ºF)
+225ºC (+437ºF)
LOW TEMPERATURE RESISTANCE tested to...
-55ºC (-67ºF)
-74ºC (-101ºF)
COMPRESSION SET minimum... 25% 50%
     
flashing calculatorTry our new Master Flash Roof Pitch Calculator which is designed specifically for Master Flash® products. Using this calculator in association with foreign or competitive products may result in installation failure. This Calculator is designed to provide assistance in planning only. It is to be used as a guide and not the ultimate source of information. Every effort has been made to make this as complete and accurate as possible. If you are installing on pitches greater than 10/12 or you desire further information, please call Aztec Washer: 1-800-WASHER-5.
 
Sizing Chart

PIPE SIZE US PART NUM FLASHING DETAILS
 
EMC 0”– 5 -3/8” EMC101BS A-Top opening diameter Closed  

(0 - 136mm)
B-Cut to suit pipe size 0”– 5 -3/8” (0 - 136mm)



C-Base dimensions 15” (381mm)

Flashing Detail

 
   
   
   
 
 
 
13821 Danielson St., Poway, California 92064 | 1-800-WASHER 5 (927-4375) | 1-858-513-4350 | Fax 1-858-513-4305

Master Flash®, Universal Master Flash®, Universal Retrofit Master Flash®, Retrofit Master Flash®, Residential Master Flash®,
Square Vent Retrofit Master Flash®, Master Seal® and Master Plug® are registered trademarks of Aztec Washer Company, Inc.
Please Note: Aztec Washer unique metal roof flashings and electrical mast connection pipe flashing products are available
online from trusted retailers.

©2009-2013 Aztec Washer Company, Inc. | Site Map | Privacy Statement