Res Lead Master Flash®

This unique flashing was designed for residential use with a built in 20 degree pitch allowing adaptability to almost any roof pitch including 45 degrees. The clearly marked designation of pipe diameter takes the guess work out of sizing. A “C20 ASTM” additional requirement was added to ensure conformance to the most stringent ozone/weathering specifications available. This addition allows the rubber a minimum 20 year life.

Check diameter of your pipe or duct and select appropriate Res-Lead Master Flash® to accommodate your application as indicated on the chart below. For extreme pitch or surface irregularity, select next larger size.
RES-LEAD MASTER FLASH® The addition of fire retarding agents milled directly into the rubber compoundcreated a self extinguishing feature which enabled conformity to "IAPMO"code requirements for Type B-Vents.A "C-12 ASTM additional requirement was added to assureconformance to the most stringent ozone/weatheringspecifications available. EASY ON-SITE CUSTOMIZATION The pull tab design and easy smooth tear grooving is intended to eliminaterazor cut and allow for circular hole."Environmentally safe" acrylic coated Safe-Lead Metal baseThe built in 20º pitch allows adaptability to almost any roof pitch including 45ºClearly marked designation of which step to tear out for whatsize pipe has taken the guess work out of sizing. EPDM RUBBER IS AVAILABLE IN BLACK OR GREY SILICONE IS AVAILABLE IN RED CUSTOM COLORS AVAILABLE UPON REQUEST, ADDITIONAL COST MAY APPLY.
Four sizes accommodate Flues & Vents From 1/4" Diameter Through 18" Diameter Designate Pipe Size Compound Part No. Flashing Details MINI 1/4" - 3" Black EPDM RL051BA A - Top Opening diameter  Closed (6.34mm - 76.2mm) Grey EPDM RL051GA B - Pull to suit pipe size  1/4" - 3" (6.34 -76.1mm) Red Silicone RL051RA B - Base Dimensions  14" -18" (355.5 -457.1mm) #1 3" - 8" Black EPDM RL101BA A - Top Opening diameter  2 - 1/2" (35mm) (76.2mm - 203.2mm) Grey EPDM RL101GA B - Pull to suit pipe size 3" - 8" (76.1 -203.1mm) Red Silicone RL102RA C - Base Dimensions  20" - 24" (508 -609mm) #2 8" - 11" Black EPDM RL201BA A - Top Opening diameter  5-5/8" (142.8mm) (203.1mm - 279.4mm) Grey EPDM RL201GA B - Pull to suit pipe size 8" - 11" (203.1 -279.3mm) Red Silicone RL202RA C - Base Dimensions   26" -30" (660.3 -762mm) #3 11" -18" Black EPDM RL301BA A -Top Opening diameter  8-3/4" (222.2mm) (279.4mm - 457.1mm) Grey EPDM RL301GA B - Pull to suit pipe size  11" - 18" (203.2 -457.2mm) Red Silicone RL302RA C - Base Dimensions  35" -35" (889 -889mm) Flashing Detail