Multi-Port Master Flash Roof Pipe Flashings by Aztec Washer 800-927-4375

Multi-Port Master Flash®

MULTI-PORT MASTER FLASH®

WEATHER PROTECTION

Made of EPDM or Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.

EASY ON-SITE CUSTOMIZING

Smooth cut is intended to eliminate razor knives. A "C-12 ASTM additional requirement was added to assure conformance to the most stringent ozone/weathering specifications available.

BASE FLEXIBILITY

The base is designed to form a seal on most panel configurations and roof pitch regardless of pipe location.

Easy install stainless steel Gripper to secure a retro custom fit.
No hassle stainless steel Gripper to secure retrofit applications Included.
Accommodates FOUR 1/4" (6mm) lines and 1 pipe 1/4" - 2-3/4" (6mm - 70mm).
Up to 4 Cables or Wires per flashing.
4 Built in Cable or Wire ports for a secure fit.

EPDM RUBBER IS AVAILABLE IN BLACK OR GREY

SILICONE IS AVAILABLE IN RED SILICONE IS AVAILABLE IN RED

CUSTOM COLORS AVAILABLE UPON REQUEST, ADDITIONAL COST MAY APPLY.


Availiable in two compounds to handle virtually all job applications
		EPDM 500	SILICONE

ADVANCED OZONE RESISTANCE tested to...		70 hour @ 500 pphm	70 hour @ 500 pphm

HIGH TEMPERATURE RESISTANCE

tested to	intermittent	• +135ºC (+275ºF)	• +260ºC (+55ºF)
	continuous	• +100ºC (+212ºF)	• +225ºC (+437ºF)

LOW TEMPERATURE RESISTANCE tested to…		• +50ºC (-65ºF)	• -74ºC (-100ºF)

TENSILE SET maximum…		10MPa (1450psi)	5 Mpa (700 psi)
COMPRESSION SET maximum…		25%	50%


Complete specification data and testing methods are availiable upon request


SIZING CHART
Check diameter of pipe. Select the appropiate Master Flash® for pipe or duct diameter. For extreme pitch or surface irregularity select next larger size. Choose the compound required, then refer to the part number for the Master Flash® desired.


	Designate Pipe Size	Compound	Part No.		Flashing Details

	STANDARD
#1	1/4" - 2-3/4"
	(6mm - 70mm)	Black EPDM	MP101BA
				Top Opening diameter (Standard Only) closed
	RETROFIT	Red Silicone	MP102RA	Base Dimensions 4-1/2"" (114mm)
#1	1-1/4" - 2-1/4"
	(25mm - 57mm)

Flashing Detail

13821 Danielson St., Poway, California 92064 | 1-800-WASHER 5 (927-4375) | 1-858-513-4350 | Fax 1-858-513-4305

Master Flash®, Universal Master Flash®, Universal Retrofit Master Flash®, Retrofit Master Flash®, Residential Master Flash®,
Square Vent Retrofit Master Flash®, Master Seal® and Master Plug® are registered trademarks of Aztec Washer Company, Inc.
©2009-2011 Aztec Washer Company, Inc. | Site Map | Privacy Statement