HOME | ABOUT US | CERTIFICATIONS | CATALOG | CONTACT US | REQUEST QUOTE
 
 
  Translate This Page 
 

Catalog

Products

Product Flyers

Aztec News

Who's Who

Green

Install Videos
 

Extreme Angle Master Flash®

Specifically designed for the metal roof industry, for applications with a 35 to 65 degree angle, while accepting and responding to the most commonly encountered pipe penetrations.

The built in 40° pitch allow the Extreme Angle Master Flash to handle any extreme roof pitch, sleeve flexibility accommodates vibration and pipe movemet caused by expansion and contraction. Easy on site customization handles all normal installations, too.


MASTER FLASH® FEATURES

WEATHER PROTECTION

Made of EPDM or Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.

EASY ON-SITE CUSTOMIZATION

Fast, one piece construction allows for easy on-site installation in usually 5 minutes.

BASE FLEXIBILITY

The soft aluminum base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location.

DESIGN EXCELLENCE

Aztec's flexible design meets virtually all roofing needs. Sleeve flexibility accommodates vibration and pipe movement caused by expansion/contraction. the soft aluminum base easily conforms to roof panels. Master Flash® was used to create a new engineering standard for profiled roofing by the International Association of Plumbing and mechanical Officials(for the uniform Plumbing Code) and remains the only product listed. These products are also listed for use with Type B vents. The addition of fire retarding agents milled directly into the rubber compound created a self extinguishing feature which enables it to be used with Type B vents. Listed with IAPMO certification No. 3121.

ADVANCED OZONE RESISTANCE tested to...

EPDM
70 hours @ 500 pphm

SILICONE
70 hours @ 500 pphm
HIGH TEMPERATURE RESISTANCE
Tested to Intermittent
  Continuous
 
+135ºC (+275ºF)
+100ºC (+212ºF)
 
+260ºC (+500ºF)
+225ºC (+437ºF)
LOW TEMPERATURE RESISTANCE tested to...
-55ºC (-67ºF)
-74ºC (-101ºF)
COMPRESSION SET minimum... 25% 50%

Check diameter of your pipe or duct and select appropriate Standard Master Flash® to accommodate your application as indicated on the chart below. For extreme pitch or surface irregularity, select next larger size.

Sizing Chart
  Pipe Size Part Number Flashing Details  
  1/4”–  5-3/4” EA101BA A-Top opening diameter Closed
6  - 146mm   B-Cut to suit pipe size   1/4”–5-3/4” (6-146mm)
  C-Base dimensions 11”  (279mm)

Flashing Detail

   
   
   
 
 
 
13821 Danielson St., Poway, California 92064 | 1-800-WASHER 5 (927-4375) | 1-858-513-4350 | Fax 1-858-513-4305

Master Flash®, Universal Master Flash®, Universal Retrofit Master Flash®, Retrofit Master Flash®, Residential Master Flash®,
Square Vent Retrofit Master Flash®, Master Seal® and Master Plug® are registered trademarks of Aztec Washer Company, Inc.
©2009-2011 Aztec Washer Company, Inc. | Site Map | Privacy Statement